Hi,
I am trying to program a SAM4S board with a WILC1000 SD connected on its SD slot to act as an access point. I use Atmel Studio 7.0.2389 (also tried 2397, 1931, 1645 and 643). There are a lot of example projects in ASF for this combination of devices, but it turned out that almost all of them are for the extension board connected to SAM4S's EXT1 connector. The only project for the SD version of the module is WILC_SERIAL_BRIDGE_WILC1000_EXAMPLE. However, it does not seem to work also. When...
Problems with SAMD4S with WILC1000 SD and example project from ASF
I am trying to program a SAM4S board with a WILC1000 SD connected on its SD slot to act as an access point. I use Atmel Studio 7.0.2389 (also tried 2397, 1931, 1645 and 643). There are a lot of example projects in ASF for this combination of devices, but it turned out that almost all of them are for the extension board connected to SAM4S's EXT1 connector. The only project for the SD version of the module is WILC_SERIAL_BRIDGE_WILC1000_EXAMPLE. However, it does not seem to work also. When...
Problems with SAMD4S with WILC1000 SD and example project from ASF